Tennis Court
PU  Court
Rubber Court
Synthetic Turf
Baseball Court

Color EPDM
Color Flooring
Epoxy- Flooring
Safety Mattings
Car Parks

Adventure Play
Ball Pond
Softplay
Toys 
Maple Flooring
Badminton
PVC Flooring
Squash Court
Sauna Room
Natural Carpets
Lockers System

Running Track
Play Equipment
Playground
Skate Court
Golf Porducts
Golf Putting
Climbing Walls

Tennis Accessories
Sport Equiment
Lighting
Tennis Post
Table Tennis
Wind Screens
Gym Mats
Safe-Walk
Bench 
Layout Plan

 

  Tel:(852) 2437 2803

  Fax:(852) 2626 9245

    Home

Court 1 Elite Tennis Posts

#244 Royale Round Post with Internal Wind
#244 Royale Round Post with Internal Wind (3" OD)

The Courtmaster Royale Line:
Its heavy-duty internal wind assembly consists of winder gear of heat-treated hardened aluminum alloy and housing of hardened bronze alloy (copper/tin/lead/zinc), making the Royale the most attractive, rugged, functional post in the game. Chip and fade-resistant powder-coated finish. Removable handle, sturdy 11 -gauge steel. Lacing rods give the net a professional appearance. Green or Black. 64" overall length. Sleeves purchased separately. 50 lbs.

#245 Royale Square Post with Internal Wind
#245 Royale Square Post with Internal Wind (3" SQ.)


#247 Round Post with External Wind#247 Round Post with External Wind (2-7/8" OD)

The Courtmaster Round External Wind Post.. Constructed of heavy-duty Schedule 40 steel with grooved post caps, eyebolts for tying the bottom of the net, and ground level pins for each post. Reel comes with removable handle for one post and a cleat mounted on the other post. Green, 55" overall length. Sleeves purchased separately. 65 lbs.



#3219 Vogue 2.5 Square Post with Internal Wind#3219 Vogue 2.5 Square Post with Internal Wind

The Courtmaster Vogue 2.5 Internal Wind Post... Design transfers cable stress to the post, unlike conventional in-cap mechanisms. Tubular steel construction with 3/1 6" wall thickness. Moving parts are enclosed in a solid brass casing, and take-up mechanism has solid brass bearings on all moving parts. Two-position net cable anchors. Baked-on polyester powder-coated finish is chip and fade resistant. Removable brass handle, professional-looking welded net lacing rods. Green. Steel tubing sleeves. 70 lbs.

#3218 Vogue 2.5 Round-to-Square Internal Wind Post with Adapter

Internal Wind Post adapts 2-1/8" to 4" ID round sleeve to fit Vogue 2.5 square post.

244 "Royale"Round Post with internal wire 3"OD

HK$ 3,X50.00/pair

3203 Sleeve HK$ 3X0.00/pair
245 "Royale"Round Post with internal wire 3"OD HK$ 3,X50.00/pair
3211 Sleeve HK$ 3X0.00/pair
243 Round Post with internal wire 3"OD-Portable HK$ 8,X00.00/set
701hvy,708, 710 Tennis Net HK$ 1,X00.00/pc
Court 1 Elite tennis posts

Model ER-200 and ES-250

AT LAST!...A Tennis Post designed with the cooperation of North America's most experienced Court Builders. With their suggestions and requirements in mind, Court 1 has engineered the new Elite Tennis Post in two models, Round (Model ER-200) and Square (Model ES-250).
Elite round and square tennis posts

A combination of stainless steel, brass and aluminum make the design of the Elite Post unique and attractive. The fully internal winder is made from brass with a brass handle. All exterior fittings are stainless steel. Posts are supplied complete with aluminum ground sleeves.

Color: Hunter Green or Black.
WT. 33 lbs. pair.

 

post3.JPG (6122 bytes)The Regal Posts Steel
Model RR-50
Features
-Heavy Duty Steel Pipe 2-7/8" OD dia.
-Rugged external ratchet winder
-Stainless Steel exterior fittings
-High gloss epoxy finnish. Color: dark green
-Supplied with or without ground sleves
-Shipping Wt. 68 lbs per pair (sleeves extra)

 

@

post1.JPG (10654 bytes)"Roof Top" Tennis Post
Model RTP-200
This fold away free standing tennis post system has been designed specially for use in areas where sleeve installation is impractical. Easily installed, just bolt into position as deeply as the floor thickness permits. Available in square style only. Brush anodized aluminum finnish.

Shipping Wt. 33 lbs per pair

 

post2.JPG (7953 bytes)Roof top adaptor (Mounting Plate)
Model RTA-100
This adaptor is ideal for roof top mounting. Steel base 12" x 12" x 1/4" thick complete with four (4) pre-drilled holes allowing easy access mounting to your roof top surface. Suitable for round or square style "Elite" posts.
Shipping Wt. 31 lbs per pair.

Top

Back

Next

@